The Definitive Guide to Selecting and Using Decorative Stones



Chapter One – Introduction
Chapter Two – Understanding Decorative Stones and Aggregates
Chapter Three – Types of Decorative Stones and Aggregates
Chapter Four – Choosing the Right Decorative Stone or Aggregate
Chapter Five – How to Lay Decorative Stone and Aggregate
Chapter Six – Maintenance of Decorative Stone and Aggregates
Chapter Seven – Inspirational Ideas for Using Decorative Stones and Aggregates
Chapter Eight – Environmental Impact and Sustainability
Chapter Nine – Conclusion

1. Introduction

Welcome to our Ultimate Guide to Decorative Stone and Aggregates for Gardens and Outdoor Spaces.

In the world of landscaping, decorative stones and aggregates aren’t just beautiful to look at – they also play pivotal roles in the design and functionality of our gardens and outdoor spaces.

These natural elements can be utilised to construct paths, regulate drainage, or simply bring a splash of colour to an area.

From the soothing humbleness of gravel paths to the dramatic presence of a lava rock garden, decorative stones and aggregates serve to not only transform the aesthetics of a space, but also to improve its practicality.

The wide variety of these materials available today means there’s something for every design, whether you’re seeking to craft a tranquil Zen garden, a vibrant, playful area, or a rugged, wilderness-inspired landscape.

This guide is designed to take you through everything you need to know about decorative stones and aggregates.

We’ll begin by clarifying what exactly these materials are and how they differ from one another.

Then, we’ll delve into the various types available, detailing their specific characteristics and uses.

To ensure you make the most suitable choice for your project, we’ll provide a thorough discussion on how to select the right stone or aggregate based on several key factors.

We’ll guide you through the process of laying these materials, followed by advice on their maintenance.

Moreover, we’ll spark your imagination with a range of creative and inspirational ideas for using these materials and discuss the environmental impact, and sustainability aspects, of their use.

Finally, we’ll provide additional resources for you to continue exploring and learning.

Let’s embark on this journey to enrich your outdoor spaces with the unique charm and practical benefits of decorative stones and aggregates!

2. Understanding Decorative Stones and Aggregates


Decorative stones and aggregates are a key part of landscape design, serving not only as pleasing aesthetic elements but also as functional components within outdoor spaces.

So, what are they exactly? Let’s break it down.

Decorative stones are pieces of rock or mineral that have been processed and refined for decorative use in gardens and landscapes.

They come in an array of colours, shapes, and sizes, from smooth river pebbles to jagged shards of slate.

These stones can be used in a variety of applications, including garden paths, patios, water features, and as a focal point in garden beds or borders.

On the other hand, aggregates are collections of specific materials, such as sand, gravel, or crushed stone, used in construction and landscaping.

In landscaping, aggregates serve multiple functions, such as improving drainage, creating surfaces for paths and driveways, and adding texture and contrast to garden beds.

Like decorative stones, they also come in various shapes, sizes, and colours, providing many design possibilities.

While decorative stones and aggregates may seem similar, there are some differences based on their formation and uses.

Decorative stones are typically used for their aesthetic appeal, often utilised as accents in a landscape.

Aggregates, meanwhile, are usually used for their physical properties like drainage capability or stability underfoot.

In essence, both decorative stones and aggregates play an integral part in landscaping projects, merging beauty with practicality.

The trick is knowing which to choose for a specific task or design, and how to use them effectively – a subject we’ll delve into in the following sections of this guide.

3. Types of Decorative Stones and Aggregates

1. Stone Chippings

Stone chippings are small, crushed stones available in various shades and materials like limestone or granite. They offer a versatile and low-maintenance option for many outdoor spaces, adding texture and colour.

Commonly used for pathways, driveways, and garden borders, stone chippings provide an attractive and functional surface.

They aid in weed prevention, drainage, and can be used to fill gaps between pavers or stepping stones, making them a practical choice for various landscaping needs.

2. Slate Chippings

Slate chippings are made from flat, angular pieces of slate, available in striking colours like blue, green, and plum. Their reflective surface adds a shimmering effect, enhancing the visual appeal of gardens and paths.

Perfect for water features, mulching, and modern landscapes, slate chippings can create visually appealing contrasts. They are often used around ponds or as a decorative mulch to retain soil moisture, adding a touch of elegance to various outdoor settings.

3. Shingles

Shingles are sub-angular stones found in various sizes and natural shades. They provide a soothing and organic aesthetic, often used to evoke a coastal or natural theme.

Suitable for driveways, paths and as a base layer for other decorative stones, shingles offer a comfortable walking surface.

They are often used in coastal-themed gardens or near water features, providing a harmonious and calming effect.

4. Pebbles & Cobbles

Pebbles are small, rounded stones, while cobbles are larger and more irregular. Both come in various colours and textures, adding rustic charm and natural beauty to landscapes.

Great for garden borders, rockeries, and water features, pebbles and cobbles can be used to create natural flow in garden designs.

They line pathways, accentuate specific areas like ponds or flower beds, and add a tactile element to outdoor spaces.

5. Gabion Stone

Gabion stones are large, rugged stones, suitable for heavy-duty applications.

They are typically 100mm to 200mm in size, and their robust nature makes them essential for structural projects.

Ideal for erosion control, retaining walls, and architectural features, gabion stones provide structural support and aesthetic appeal.

They are used in large-scale projects like bridge abutments or slope stabilisation, offering both strength and visual interest.

6. Wood Chippings

Wood chippings are shredded pieces of wood, available in various types and colours.

They offer a softer alternative to stones, bringing a natural, woodland feel to gardens and play areas.

Excellent for play areas, mulching, and creating a cosy atmosphere, wood chippings provide cushioning, retain soil moisture, and can be used to create woodland-themed garden paths or safe play areas for children.

[Insert Image of Wood Chippings]

7. Topsoil

Topsoil is the uppermost layer of soil, rich in nutrients and organic matter.

It’s often screened to remove debris and can be mixed with compost to create a fertile ground for planting, vital for healthy plant growth.

Perfect for planting new gardens, improving existing soil, and creating raised beds, topsoil provides a fertile ground for flowers, vegetables, and lawns.

It promotes healthy growth, improves soil structure, and is a key component in successful gardening.

This comprehensive and detailed guide offers an in-depth look at the various decorative stones and aggregates, their unique characteristics, and their versatile applications.

Whether you’re a professional landscaper or a home gardener, these materials provide endless possibilities for enhancing both the beauty and functionality of outdoor spaces, allowing you to craft landscapes that are both functional and beautiful.

4. Choosing the Right Decorative Stone or Aggregate


The visual appeal is a key consideration, and each material offers unique aesthetic qualities:

Stone Chippings:

These versatile stones come in various shades and materials, like limestone or granite.

They can be matched to existing structures, creating a cohesive look, and their texture adds depth to garden designs.

Slate Chippings:

Known for striking colours and reflective surfaces, slate chippings can create a modern, elegant look.

Their angular shape adds texture, and their colour variations can be used to create visual interest.


Sub-angular shingles offer a calming, natural feel. They’re perfect for coastal or Zen-inspired gardens, providing a harmonious blend with water features and soft planting schemes.

Pebbles & Cobbles:

These natural stones add rustic charm and tactile interest. Their varied shapes and sizes can be used to line meandering paths or to highlight specific garden areas.

Gabion Stone:

Ideal for structural projects, gabion stones add an industrial touch. They can be used to create retaining walls or seating, blending functionality with aesthetic appeal.

Wood Chippings:

Offering a softer woodland feel, wood chippings provide a natural appearance that complements trees and shrubs, and their colour can be chosen to match existing wooden structures.


Essential for plant growth, quality topsoil enhances the lushness of your garden. Its texture and colour should be considered to blend seamlessly with the chosen planting scheme.


Functionality varies with material and application:


Stone chippings, shingles, and pebbles & cobbles are excellent for drainage, allowing water to flow through, which is vital in areas prone to waterlogging.

Soil Conditions:

Topsoil, rich in nutrients, supports plant growth. Wood chippings can retain moisture and regulate soil temperature, while slate chippings can suppress weed growth.

Structural Support:

Gabion stones are used in heavy-duty applications, providing stability and strength in retaining walls and erosion control projects.


Cost considerations include not only the initial expense but also long-term value:

Stone Chippings and Shingles:

Often budget-friendly, they provide a durable and attractive option without a high price tag.

Slate Chippings and Gabion Stone:

These may be more expensive but offer unique aesthetic and functional benefits that may justify the investment.

Wood Chippings:

An economical choice for mulching and play areas, but consider the potential need for more frequent replacement.


Maintenance needs vary:

Stone and Slate Chippings:

Low maintenance but may require occasional cleaning or replenishment to maintain colour and texture.

Wood Chippings:

Require monitoring for decomposition, especially in damp conditions, and may need periodic replacement.


Regular care, including fertilisation and potential pH balancing, is essential to maintain fertility and support healthy plant growth.

Matching with Garden’s Style and Existing Structures

Consider the overall style and existing structures:

Modern Gardens:

Slate chippings or gabion stones offer sleek lines and contemporary appeal.

Traditional Gardens:

Pebbles, cobbles, or stone chippings provide timeless elegance and can be matched to existing stone structures.

Play Areas or Woodland Themes:

Wood chippings offer a soft, natural surface that’s child-friendly and can be matched to wooden play equipment.


Choosing the right decorative stone or aggregate is a complex decision that requires expert consideration of aesthetics, functionality, cost, and maintenance.

Understanding the unique characteristics, applications, and long-term implications of each type allows for an informed and successful choice.

Whether creating a sleek, modern terrace with slate chippings or a lush, vibrant garden with quality topsoil, the right choice of material can elevate your outdoor space to a new level of beauty and functionality.

Always consider consulting with a landscaping professional to ensure that the chosen materials align perfectly with your specific needs and design vision.

5. How to Lay Decorative Stone and Aggregate

Whether you’re creating a pathway, a patio, or a decorative garden feature, laying decorative stone or aggregate is a straightforward process that you can accomplish with some careful planning and a bit of effort.

Here’s a step-by-step guide:

1. Site Preparation

Start by marking out the area where you plan to lay your stone or aggregate.

You can use string or spray paint for this. Remove any existing grass, plants, or debris from the area.

Depending on the project, you may need to dig down to achieve a level base or to accommodate a layer of stone or aggregate.

2. Install a Weed Barrier

To prevent weeds from growing through your stones or aggregate, it’s a good idea to install a weed barrier.

This is usually a fabric sheet that allows water to pass through but inhibits weed growth. Lay the weed barrier down in the prepared area, securing it with garden staples or weights.

3. Edge the Area

Edging is essential for keeping your stone or aggregate contained.

You can use a variety of materials for this, including metal or plastic edging, wood, bricks, or larger stones.

The edging should be installed firmly and sit at the appropriate height relative to the planned stone or aggregate layer.

4. Laying the Stone or Aggregate

Now, it’s time to add your stone or aggregate.

This can usually be done by shovelling it into the area and spreading it out.

Aim for an even distribution across the area. Depending on the project, you might need to add a few inches of stone or aggregate, compact it, and then add the next layer.

5. Compact and Level

Once you’ve added your stone or aggregate, it’s important to compact it to create a stable surface.

This can be done with a hand tamper for smaller areas or a mechanical plate compactor for larger areas.

As you compact, also ensure the surface is level or has the appropriate slope if you’re aiming for drainage.

Top tip: angular-shaped materials will compact better than round or sub-angular aggregates.

6. Finishing Touches

Brush off any excess stones from the edging and surrounding areas, and make any necessary adjustments to ensure the area looks neat and tidy.

A few tips to remember:

Always order a bit more stone or aggregate than you think you’ll need to account for settling and for having extra to top up the area in the future.

When spreading your stone or aggregate, you might find it helpful to use a rake or a broom to achieve an even layer.

Remember, laying decorative stone or aggregate can be a physical job, so make sure you’re appropriately prepared with safety gear, including sturdy footwear, gloves, and potentially eye protection, especially during the compaction phase.

6. Maintenance of Decorative Stone and Aggregates

Even though decorative stones and aggregates are hardy materials, they still require a certain level of maintenance to keep them looking their best and functioning as they should.

Here’s how you can ensure they continue to enhance your outdoor space over the years:


Over time, stones and aggregates can accumulate dust, leaves, and other debris.

Regularly raking the area can help maintain its appearance and prevent debris from becoming compacted.

For a deeper clean, you can use a hose to wash the stones. Be careful with the water pressure – you want to clean the stones without displacing them.

For stubborn dirt or algae on larger stones, a soft brush and soapy water can be used.

Weed Control

Despite the use of weed barriers, some hardy weeds may occasionally find their way to the surface. These should be promptly removed to prevent them from spreading. Avoid using chemical weed killers, as they may discolour the stones.

Replenishing Stones and Aggregates

Over time, stones and aggregates can sink into the soil or get displaced. This is a normal part of their lifecycle, but it means that occasionally, you may need to top up the area with fresh material.

Keep some extra stone or aggregate on hand for this purpose.

When replenishing, you should also take the opportunity to check the condition of the underlying weed barrier and replace it if necessary. Before adding new stones or aggregate, clean the area and remove any weeds.

Then, simply spread the new material over the area, aiming for an even layer. Use a rake or broom to help distribute it evenly.

Inspect Regularly

It’s a good practice to inspect your stone or aggregate areas regularly, particularly after heavy rainfall or high winds, which can wash away or displace material.

Regular checks will allow you to address any issues promptly, maintaining the area’s functionality and aesthetics.

Proper maintenance of decorative stones and aggregates not only keeps them looking great but also extends their lifespan, providing you with a more cost-effective solution in the long run.

It might seem like a chore, but with regular care, your efforts will be rewarded with a beautiful and functional outdoor space.

7. Inspirational Ideas for Using Decorative Stones and Aggregates

Decorative stones and aggregates provide a versatile and practical way to add colour, texture, and structure to your garden and outdoor spaces.

Whether you’re seeking a minimalist design, a rustic vibe, or an exotic appeal, these materials can help you achieve your vision.

Here are some inspirational ideas to get you started:

Pathways and Walkways

Gravel, pebbles, or decomposed granite can create attractive and functional paths and walkways.

They can meander through your garden, leading the eye and the foot through different areas.

Combine different stone or aggregate types for added visual interest, or edge your path with larger stones or bricks for definition.

Water Features

The use of stones can greatly enhance the appearance of water features.

Smooth river rocks around the base of a fountain can create a naturalistic look, while brightly coloured glass aggregates can provide a more contemporary style.

Stones also help to hide the equipment in a pond or waterfall, enhancing the illusion of a natural water body.

Rock Gardens

For a low-maintenance garden, consider creating a rock garden.

Combine a variety of stone types and sizes with drought-tolerant plants for an appealing display.

Lava rock can add an interesting texture contrast, while larger boulders can serve as focal points.

Borders and Edging

Decorative stones and aggregates can create attractive borders and edges for garden beds, lawns, and paths.

Smaller stones, like marble chips or pebbles, create a delicate border, while larger stones or rocks can provide a bold boundary.

Stones can help to keep mulch in place, define the lines of a space, and create contrast with the surrounding vegetation.

Patio Areas

Stones and aggregates can also play a key role in patio design.

Crushed stone or decomposed granite can provide a firm yet permeable ground cover for seating areas, while pebbles or glass aggregates can add decorative elements to potted plants or table centrepiece designs.

These are just a few of the many ways you can use decorative stones and aggregates in your garden and outdoor spaces.

The versatility of these materials allows you to be creative and customise your space to fit your personal taste and lifestyle.

So whether you’re looking to add a functional pathway, an attractive border, or a striking focal point, decorative stones and aggregates could be the perfect solution.

8. Environmental Impact and Sustainability

As with any material we use in our gardens and outdoor spaces, it’s important to consider the environmental impact of decorative stones and aggregates.

From sourcing and extraction to their impact on local ecosystems and eventual disposal, every stage has implications.

By making informed choices, we can minimise these impacts and contribute to a more sustainable environment.

Sourcing and Extraction

Mining and quarrying for decorative stones and aggregates can have significant environmental impacts, including habitat destruction, soil erosion, and pollution.

Choosing locally sourced stones reduces the carbon footprint associated with transportation.

Alternatively, consider recycled materials, such as crushed concrete or glass aggregates, which not only reduce the need for new extraction but also put to good use materials that might otherwise go to waste.

Impact on Local Ecosystems

While decorative stones and aggregates can enhance our gardens, they can also impact local ecosystems.

For example, using stones in areas where they’re not naturally found can alter habitat conditions for local flora and fauna.

In addition, impermeable surfaces can disrupt natural water flow patterns and contribute to water runoff. Choosing permeable materials, like gravel or decomposed granite, can help mitigate this.


Sustainable gardening practices with decorative stones and aggregates include choosing durable materials that don’t need to be replaced often, thereby reducing resource consumption.

Reusing and recycling stones is another way to enhance sustainability.

For instance, if you’re renovating a space, consider how existing stones could be repurposed rather than discarded.


Eventually, there may come a time when you need to dispose of stones or aggregates.

Rather than sending them to a landfill, look for recycling programs in your area, or consider ways they could be reused, for example, in construction projects or as fill material.

Eco-friendly Usage Tips

To ensure the eco-friendly usage of decorative stones and aggregates, you can follow some simple practices.

Use only the amount needed for your project to prevent wastage.

Install a weed barrier to minimise the need for chemical weed killers.

Consider integrating your stone areas with native plants, which are adapted to your local conditions and support local biodiversity.

By considering these factors, you can enjoy the beauty and functionality of decorative stones and aggregates in your garden and outdoor spaces, while also minimising your environmental impact and contributing to a more sustainable future.


Over the course of this guide, we’ve journeyed through the multifaceted world of decorative stones and aggregates for garden and outdoor spaces.

From understanding their basics to exploring their types, we’ve uncovered how these versatile materials can transform an outdoor space, providing not only aesthetic appeal but also functional benefits.

We’ve considered the various factors that influence the choice of stone or aggregate – factors like aesthetics, cost, functionality, and maintenance.

We’ve also delved into the process of laying these materials, outlining the essential steps of site preparation, laying the stones or aggregates, and compacting for stability.

In our discussion on maintenance, we’ve underscored the importance of regular cleaning, weed control, and timely replenishment to keep these materials looking their best and performing optimally.

We’ve also ignited your imagination with some inspirational ideas for using stones and aggregates, whether in pathways, rock gardens, borders, or patio areas.

Finally, we’ve touched on the vital subject of environmental impact and sustainability, encouraging mindful choices in sourcing, usage, and disposal of these materials for a more sustainable garden and a healthier planet.

Armed with this knowledge, you’re now well-equipped to embark on your own landscaping adventure.

Whether it’s a small garden project or a large-scale landscape transformation, decorative stones and aggregates can add a unique charm and character to your space.

So, go ahead, let your creativity take flight and start planning your project. You have the power to create a stunning outdoor space that’s not only pleasing to the eye but also kind to our planet.

Happy landscaping!

Apply here

    When you submit this form, you are giving us permission to contact you by both email and telephone with regards to your enquiry. By submitting this contact form, you consent to your personal data being stored and processed in our CRM system, as described in our Privacy Policy.

    We’d love to keep you up to date about our relevant products, services, news and events. Please select one of the following options: