EcoBlend® GA


A sub-base produced from crushed quarried aggregate blended with 0/32mm IBAA ranging between 0mm to 32mm



Conversion factor: Approximately 1.9 tonnes per m³
Conforms to: SHW Clause 803, BS EN 13285

Typical Uses

  • Used to create an easily compacted load bearing non-permeable sub-base and back fill i.e. roads, paths, driveways, car parks and structural bases

  • Typical use is as a finished surface prior to a top coating of asphalt, concrete, shingle and block paving                           

Useful Information

  • A well-graded mixture that interlocks when compacted to ensure minimal voids and provide excellent load-bearing qualities. Should be non-frost susceptible when used within 450mm of the finished surface, and has a maximum permitted top size of 63mm, graded down to dust

  • Unlike primary materials an EcoBlend® product will have an allowed level of contamination by weight, this can be metal, ceramic, glass etc. Due to this fact, we must make sure that Ecoblend®  material is not the finished surface

  • If not conditioned with water the material will not compact properly

Contact Us

Please use our online form to send us your enquiry and a member of our team will get back to you. Alternatively, you can contact our head office directly:
020 8380 9600 or

Contact us

Request A Quote

Please use our online form to send us your enquiry and a member of our team will get back to you. Alternatively, you can contact our sales team directly:
020 8380 9600 or

Request a quote